• inner-banner

Chinese Professional High Pressure Hydraulic Cylinder - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai

Chinese Professional High Pressure Hydraulic Cylinder - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

"Control the quality by the details, show the strength by quality". Our company has strived to establish a highly efficient and stable staff team and explored an effective quality control process for Telescopic Cylinder, Farm Hydraulic Cylinders, 110v Hydraulic Power Unit, Any requires from you will be paid with our best attention!
Chinese Professional High Pressure Hydraulic Cylinder - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai Detail:

Main Specifications

Motor: AC 380V 1.1KW
Solenoid valve: 2/2ways solenoid control valve
Pump displacement: 3.2CC/REV
System flow: 4.5lpm
Tank: 12L steel square tank
Mounting type: Vertical
Hydraulic power unit

Power Voltage AC110, AC220, AC380, DC12V, DC24V or customized
Moter Power 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3.0kw or customized
Pump Displacement 0.45ml/r, 0.75ml/r, 1.0ml/r, 1.6ml/r, 2.0ml/r, 2.5ml/r, 3.3ml/r, 4.2ml/r,5.8 ml/r or customized
Solenoid Valve Voltage DC12V, DC24V, AC24V, AC110V, AC220V, manual valve
Mounting Way Horizontal, Vertical
Mounting position Valve block,  bracket, oil tank, electric motor
System Pressure 10mpa, 16mpa, 20mpa, 25mpa
Capacity of tank 1.7L, 2.8L, 3.6L, 5.0L, 6.0L, 8.0L, 10.0L, 12.0L or customized
Circuit 01-20
Port 3/8″ (BSPP/NPT) or customized
Working Continute working, short time working
Frequency 50HZ, 60HZ

Precautions for Use

1. Please read the operation manual carefully and check the product model and parameters for correctness.
2. The hydraulic power unit should be installed correctly and connected correctly. Pay attention to whether the voltage of motor and solenoid valve is consistent with the power supply (see electrical schematic diagram), and whether the rotation direction of motor is correct (clockwise from the end of the shaft).
3. Regular
The power unit motor is gap type
4. The work week
The continuous working time of one start is 3 minutes and the rest is 7 minutes. It can not run continuously.
5. The working pressure of the hydraulic power unit has been adjusted when it leaves the factory. In order to maintain a good use state, please do not adjust it casually.
6. The hydraulic power unit should use anti-wear hydraulic oil with a kinematic viscosity of 27 43mm/s(50°C). Ya-n46 is recommended when the oil temperature is lower than 50°C, and YA-N68 is recommended when the oil temperature is higher than 50°C
10~ 25μm filter filter, conventional adding amount is 85~90% of the effective volume of the tank, conventional oil temperature should be within the range of -10~80°C, especially cold areas, low temperature hydraulic oil should be used.

AC-380V-1.5KW-Single-Acting-Hydraulic-Power-Packs07


Product detail pictures:

Chinese Professional High Pressure Hydraulic Cylinder - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

Chinese Professional High Pressure Hydraulic Cylinder - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

Chinese Professional High Pressure Hydraulic Cylinder - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

Chinese Professional High Pressure Hydraulic Cylinder - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

Chinese Professional High Pressure Hydraulic Cylinder - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

Chinese Professional High Pressure Hydraulic Cylinder - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures


Related Product Guide:

The key to our success is "Good Product or service High quality, Reasonable Rate and Efficient Service" for Chinese Professional High Pressure Hydraulic Cylinder - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai , The product will supply to all over the world, such as: Somalia, Greece, Turkmenistan, We have now a good reputation for stable quality goods, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!
  • The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
    5 Stars By Jonathan from Dubai - 2017.12.19 11:10
    Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
    5 Stars By Gloria from South Africa - 2018.02.21 12:14
    Write your message here and send it to us